Aluminium Sheets And Plates

Product Details:

The chemical composition of aluminum alloy 6061 typically includes:

• Aluminum (Al): 95.8% to 98.6%
• Magnesium (Mg): 0.8% to 1.2%
• Silicon (Si): 0.4% to 0.8%
• Iron (Fe): 0.7% maximum
• Copper (Cu): 0.15% to 0.40%
• Zinc (Zn): 0.25% maximum
• Titanium (Ti): 0.15% maximum
• Chromium (Cr): 0.04% to 0.35%
• Other elements: 0.05% maximum each, 0.15% maximum total for impurities

Product Details:

The chemical composition of aluminum alloy 6061 typically includes:

• Aluminum (Al): 95.8% to 98.6%
• Magnesium (Mg): 0.8% to 1.2%
• Silicon (Si): 0.4% to 0.8%
• Iron (Fe): 0.7% maximum
• Copper (Cu): 0.15% to 0.40%
• Zinc (Zn): 0.25% maximum
• Titanium (Ti): 0.15% maximum
• Chromium (Cr): 0.04% to 0.35%
• Other elements: 0.05% maximum each, 0.15% maximum total for impurities

Additional Information:

• Production Capacity: 10000
• Delivery Time: READY STOCK
• Packaging Details: AS PER REQUIREMENT

Product Details:

The chemical composition of aluminum alloy 6061 typically includes:

• Aluminum (Al): 95.8% to 98.6%
• Magnesium (Mg): 0.8% to 1.2%
• Silicon (Si): 0.4% to 0.8%
• Iron (Fe): 0.7% maximum
• Copper (Cu): 0.15% to 0.40%
• Zinc (Zn): 0.25% maximum
• Titanium (Ti): 0.15% maximum
• Chromium (Cr): 0.04% to 0.35%
• Other elements: 0.05% maximum each, 0.15% maximum total for impurities

Additional Information:

• Production Capacity: 10000
• Delivery Time: READY STOCK

Product Details:

Aluminium alloy 7075 is a high-strength, high-temperature resistant alloy commonly used in aerospace and defense applications. It has a high strength-to-weight ratio, making it an ideal material for structures that require minimal weight while maintaining strength and durability.
Here are some key properties and applications of Aluminium alloy 7075:
Properties:
- High strength (ultimate tensile strength: 83,000 psi / 570 MPa)- High fatigue resistance- High corrosion resistance- High temperature resistance (up to 400°F / 200°C)- Low density (2.81 g/cm³)
Applications:
- Aerospace industry (aircraft structures, fasteners, and fittings)- Defense industry (military equipment, weapons, and vehicles)- High-performance sports equipment (bicycle frames, golf clubs, and tennis rackets)- High-stress mechanical components (gears, axles, and shafts)
Do you have any specific questions about Aluminium alloy 7075 or its applications? I'm here to help!

Additional Information:

• Production Capacity: 10000
• Delivery Time: READY STOCK
• Packaging Details: AS PER REQUIREMENT

Product Details:

6082-T6 is a type of aluminum alloy. Here's its chemical composition:
- Aluminum (Al): 95.5-98.5%- Magnesium (Mg): 0.6-1.2%- Silicon (Si): 0.7-1.3%- Manganese (Mn): 0.4-1.0%- Iron (Fe): 0.5% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.2% max- Titanium (Ti): 0.1% max- Chromium (Cr): 0.25% max
The "T6" temper indicates that the alloy has been solution heat-treated and artificially aged to achieve a stable and high-strength state.

Product Details:

6082-T6 is a type of aluminum alloy. Here's its chemical composition:
- Aluminum (Al): 95.5-98.5%- Magnesium (Mg): 0.6-1.2%- Silicon (Si): 0.7-1.3%- Manganese (Mn): 0.4-1.0%- Iron (Fe): 0.5% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.2% max- Titanium (Ti): 0.1% max- Chromium (Cr): 0.25% max
The "T6" temper indicates that the alloy has been solution heat-treated and artificially aged to achieve a stable and high-strength state.

Product Details:

6082-T6 is a type of aluminum alloy. Here's its chemical composition:
- Aluminum (Al): 95.5-98.5%- Magnesium (Mg): 0.6-1.2%- Silicon (Si): 0.7-1.3%- Manganese (Mn): 0.4-1.0%- Iron (Fe): 0.5% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.2% max- Titanium (Ti): 0.1% max- Chromium (Cr): 0.25% max
The "T6" temper indicates that the alloy has been solution heat-treated and artificially aged to achieve a stable and high-strength state.

Product Details:

6082-T6 is a type of aluminum alloy. Here's its chemical composition:
- Aluminum (Al): 95.5-98.5%- Magnesium (Mg): 0.6-1.2%- Silicon (Si): 0.7-1.3%- Manganese (Mn): 0.4-1.0%- Iron (Fe): 0.5% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.2% max- Titanium (Ti): 0.1% max- Chromium (Cr): 0.25% max
The "T6" temper indicates that the alloy has been solution heat-treated and artificially aged to achieve a stable and high-strength state.

Product Details:

5052-H32 is a type of aluminum alloy. Here's its chemical composition:
- Aluminum (Al): 95.5-98.5%- Magnesium (Mg): 2.5-3.5%- Chromium (Cr): 0.15-0.35%- Copper (Cu): 0.1% max- Iron (Fe): 0.4% max- Manganese (Mn): 0.1% max- Silicon (Si): 0.4% max- Zinc (Zn): 0.1% max
The "H32" temper indicates that the alloy has been strain-hardened and stabilized to a quarter-hard state, which provides a balance of strength, formability, and corrosion resistance.

Product Details:

- 7075 T6 is a high-strength aluminum alloy, commonly used in aerospace and defense applications.- AMS 4045 is a specification for 7075 T6 aluminum sheet, published by SAE International (formerly known as the Society of Automotive Engineers).
Properties:
- Composition: Aluminum (90%), Zinc (5.5-6.5%), Magnesium (2.1-2.9%), Copper (1.2-2.0%)- Temper: T6 (solution heat-treated and artificially aged)- Thickness: 0.012 - 4.000 inches (0.305 - 101.6 mm)- Width: Up to 120 inches (3048 mm)- Length: Up to 360 inches (9144 mm)

Product Details:

- 7075 T6 is a high-strength aluminum alloy, commonly used in aerospace and defense applications.- AMS 4045 is a specification for 7075 T6 aluminum sheet, published by SAE International (formerly known as the Society of Automotive Engineers).
Properties:
- Composition: Aluminum (90%), Zinc (5.5-6.5%), Magnesium (2.1-2.9%), Copper (1.2-2.0%)- Temper: T6 (solution heat-treated and artificially aged)- Thickness: 0.012 - 4.000 inches (0.305 - 101.6 mm)- Width: Up to 120 inches (3048 mm)- Length: Up to 360 inches (9144 mm)

Product Details:

- 7075 T6 is a high-strength aluminum alloy, commonly used in aerospace and defense applications.- AMS 4045 is a specification for 7075 T6 aluminum sheet, published by SAE International (formerly known as the Society of Automotive Engineers).
Properties:
- Composition: Aluminum (90%), Zinc (5.5-6.5%), Magnesium (2.1-2.9%), Copper (1.2-2.0%)- Temper: T6 (solution heat-treated and artificially aged)- Thickness: 0.012 - 4.000 inches (0.305 - 101.6 mm)- Width: Up to 120 inches (3048 mm)- Length: Up to 360 inches (9144 mm)

Product Details:

We Renaissance fittings & Piping INC is highly engaged in all types Stainless steel Aluiminium Copper and High Nickel Metal  We have huge experience since generation and materials we are providing is highly qualitative

Product Details:

We Renaissance fittings & Piping INC is highly engaged in all types Stainless steel Aluiminium Copper and High Nickel Metal  We have huge experience since generation and materials we are providing is highly qualitative

Product Details:

We Renaissance fittings & Piping INC is highly engaged in all types Stainless steel Aluiminium Copper and High Nickel Metal  We have huge experience since generation and materials we are providing is highly qualitative

Product Details:

We Renaissance fittings & Piping INC is highly engaged in all types Stainless steel Aluiminium Copper and High Nickel Metal We have huge experience since generation and materials we are providing is highly qualitative

Product Details:

Aluminium Fittings a subsidiary of RFPIndia Inc is an Aluminium Plates stockholders and suppliers delivering to whole of the world We are an ISO 9001 2015 ISO 45001 2018 ISO 14001 2015 ISO 9001 2015 Certified company one of the leading Aluminium dealer in the world The Aluminium Plates have excellent quality to fully satisfy customer s requirement

Product Details:

6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded

STOCK RANGE - 1MM TO 600MM 
WIDTH - UPTO 2500MM
LENGTH - UPTO 12000MM

WE CAN PROVIDE THE FOLLWOING GRADES : 6061 T6, 6061 T651, 6061 T5, 6061 T4

Product Details:

The chemical composition of aluminum alloy 6061 typically includes:

• Aluminum (Al): 95.8% to 98.6%
• Magnesium (Mg): 0.8% to 1.2%
• Silicon (Si): 0.4% to 0.8%
• Iron (Fe): 0.7% maximum
• Copper (Cu): 0.15% to 0.40%
• Zinc (Zn): 0.25% maximum
• Titanium (Ti): 0.15% maximum
• Chromium (Cr): 0.04% to 0.35%
• Other elements: 0.05% maximum each, 0.15% maximum total for impurities

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: AS PER REQUIREMENT

Product Details:

The chemical composition of aluminum alloy 6061 typically includes:

• Aluminum (Al): 95.8% to 98.6%
• Magnesium (Mg): 0.8% to 1.2%
• Silicon (Si): 0.4% to 0.8%
• Iron (Fe): 0.7% maximum
• Copper (Cu): 0.15% to 0.40%
• Zinc (Zn): 0.25% maximum
• Titanium (Ti): 0.15% maximum
• Chromium (Cr): 0.04% to 0.35%
• Other elements: 0.05% maximum each, 0.15% maximum total for impurities

Additional Information:

• Production Capacity: 10000
• Delivery Time: READY STOCK

Product Details:

Aluminium alloy 7075 is a high-strength, high-temperature resistant alloy commonly used in aerospace and defense applications. It has a high strength-to-weight ratio, making it an ideal material for structures that require minimal weight while maintaining strength and durability.
Here are some key properties and applications of Aluminium alloy 7075:
Properties:
- High strength (ultimate tensile strength: 83,000 psi / 570 MPa)- High fatigue resistance- High corrosion resistance- High temperature resistance (up to 400°F / 200°C)- Low density (2.81 g/cm³)
Applications:
- Aerospace industry (aircraft structures, fasteners, and fittings)- Defense industry (military equipment, weapons, and vehicles)- High-performance sports equipment (bicycle frames, golf clubs, and tennis rackets)- High-stress mechanical components (gears, axles, and shafts)
Do you have any specific questions about Aluminium alloy 7075 or its applications? I'm here to help!

Product Details:

5083 H116 is a type of aluminum alloy. The chemical composition of 5083 H116 includes:
- Aluminum (Al): 94.4-96.4%- Manganese (Mn): 0.4-1.0%- Magnesium (Mg): 4.0-4.9%- Chromium (Cr): 0.05-0.25%- Iron (Fe): 0.4% max- Silicon (Si): 0.4% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.25% max- Titanium (Ti): 0.15% max- Other elements: 0.05% max
The "H116" temper indicates that the alloy has been strain-hardened and stabilized to provide high strength and corrosion resistance. This alloy is commonly used in marine applications, such as shipbuilding, due to its excellent corrosion resistance and weldability.

Product Details:

Aluminium Sheets & Plates :

Grade : 5052 H32 ,5083 H116,  6061 T6, 6082 T6 , 7075 T651 , 2024 , 2014

Thickness : 1mm to 300mm

Additional Information:

• Item Code: 76061200
• Production Capacity: as per coustomer requirement
• Delivery Time: ready stock / make to order

Product Details:

Aluminium Sheets & Plates :

Grade : 5052 H32 ,5083 H116,  6061 T6, 6082 T6 , 7075 T651 , 2024 , 2014

Thickness : 1mm to 300mm

Product Details:

The chemical composition of aluminum alloy 6061 typically includes:

• Aluminum (Al): 95.8% to 98.6%
• Magnesium (Mg): 0.8% to 1.2%
• Silicon (Si): 0.4% to 0.8%
• Iron (Fe): 0.7% maximum
• Copper (Cu): 0.15% to 0.40%
• Zinc (Zn): 0.25% maximum
• Titanium (Ti): 0.15% maximum
• Chromium (Cr): 0.04% to 0.35%
• Other elements: 0.05% maximum each, 0.15% maximum total for impurities

Additional Information:

• Production Capacity: 10000
• Delivery Time: READY STOCK

Product Details:

The chemical composition of aluminum alloy 6061 typically includes:

• Aluminum (Al): 95.8% to 98.6%
• Magnesium (Mg): 0.8% to 1.2%
• Silicon (Si): 0.4% to 0.8%
• Iron (Fe): 0.7% maximum
• Copper (Cu): 0.15% to 0.40%
• Zinc (Zn): 0.25% maximum
• Titanium (Ti): 0.15% maximum
• Chromium (Cr): 0.04% to 0.35%
• Other elements: 0.05% maximum each, 0.15% maximum total for impurities

Additional Information:

• Production Capacity: 100000
• Delivery Time: READY STOCK
• Packaging Details: AS PER REQUIREMENT

Product Details:

Aluminium alloy 7075 is a high-strength, high-temperature resistant alloy commonly used in aerospace and defense applications. It has a high strength-to-weight ratio, making it an ideal material for structures that require minimal weight while maintaining strength and durability.
Here are some key properties and applications of Aluminium alloy 7075:
Properties:
- High strength (ultimate tensile strength: 83,000 psi / 570 MPa)- High fatigue resistance- High corrosion resistance- High temperature resistance (up to 400°F / 200°C)- Low density (2.81 g/cm³)
Applications:
- Aerospace industry (aircraft structures, fasteners, and fittings)- Defense industry (military equipment, weapons, and vehicles)- High-performance sports equipment (bicycle frames, golf clubs, and tennis rackets)- High-stress mechanical components (gears, axles, and shafts)
Do you have any specific questions about Aluminium alloy 7075 or its applications? I'm here to help!

Product Details:

5083 H116 is a type of aluminum alloy. The chemical composition of 5083 H116 includes:
- Aluminum (Al): 94.4-96.4%- Manganese (Mn): 0.4-1.0%- Magnesium (Mg): 4.0-4.9%- Chromium (Cr): 0.05-0.25%- Iron (Fe): 0.4% max- Silicon (Si): 0.4% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.25% max- Titanium (Ti): 0.15% max- Other elements: 0.05% max
The "H116" temper indicates that the alloy has been strain-hardened and stabilized to provide high strength and corrosion resistance. This alloy is commonly used in marine applications, such as shipbuilding, due to its excellent corrosion resistance and weldability.

Product Details:

5083 H116 is a type of aluminum alloy. The chemical composition of 5083 H116 includes:
- Aluminum (Al): 94.4-96.4%- Manganese (Mn): 0.4-1.0%- Magnesium (Mg): 4.0-4.9%- Chromium (Cr): 0.05-0.25%- Iron (Fe): 0.4% max- Silicon (Si): 0.4% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.25% max- Titanium (Ti): 0.15% max- Other elements: 0.05% max
The "H116" temper indicates that the alloy has been strain-hardened and stabilized to provide high strength and corrosion resistance. This alloy is commonly used in marine applications, such as shipbuilding, due to its excellent corrosion resistance and weldability.

Product Details:

6082-T6 is a type of aluminum alloy. Here's its chemical composition:
- Aluminum (Al): 95.5-98.5%- Magnesium (Mg): 0.6-1.2%- Silicon (Si): 0.7-1.3%- Manganese (Mn): 0.4-1.0%- Iron (Fe): 0.5% max- Copper (Cu): 0.1% max- Zinc (Zn): 0.2% max- Titanium (Ti): 0.1% max- Chromium (Cr): 0.25% max
The "T6" temper indicates that the alloy has been solution heat-treated and artificially aged to achieve a stable and high-strength state.

Product Details:

- 7075 T6 is a high-strength aluminum alloy, commonly used in aerospace and defense applications.- AMS 4045 is a specification for 7075 T6 aluminum sheet, published by SAE International (formerly known as the Society of Automotive Engineers).
Properties:
- Composition: Aluminum (90%), Zinc (5.5-6.5%), Magnesium (2.1-2.9%), Copper (1.2-2.0%)- Temper: T6 (solution heat-treated and artificially aged)- Thickness: 0.012 - 4.000 inches (0.305 - 101.6 mm)- Width: Up to 120 inches (3048 mm)- Length: Up to 360 inches (9144 mm)

Product Details:

- 7075 T6 is a high-strength aluminum alloy, commonly used in aerospace and defense applications.- AMS 4045 is a specification for 7075 T6 aluminum sheet, published by SAE International (formerly known as the Society of Automotive Engineers).
Properties:
- Composition: Aluminum (90%), Zinc (5.5-6.5%), Magnesium (2.1-2.9%), Copper (1.2-2.0%)- Temper: T6 (solution heat-treated and artificially aged)- Thickness: 0.012 - 4.000 inches (0.305 - 101.6 mm)- Width: Up to 120 inches (3048 mm)- Length: Up to 360 inches (9144 mm)

Product Details:

- 7075 T6 is a high-strength aluminum alloy, commonly used in aerospace and defense applications.- AMS 4045 is a specification for 7075 T6 aluminum sheet, published by SAE International (formerly known as the Society of Automotive Engineers).
Properties:
- Composition: Aluminum (90%), Zinc (5.5-6.5%), Magnesium (2.1-2.9%), Copper (1.2-2.0%)- Temper: T6 (solution heat-treated and artificially aged)- Thickness: 0.012 - 4.000 inches (0.305 - 101.6 mm)- Width: Up to 120 inches (3048 mm)- Length: Up to 360 inches (9144 mm)

Product Details:

We are engaged in offering a wide range of Renaissance Fittings Piping Inc to our clients. Our range of all products is widely appreciated by our clients